Two-Way Slab Design Based on ACI 318-11 using Finite Element Method
The slab is designed as two way When the ratio of long span to short span is less than 2, then the slab is known as a slab spanning in two directions or two-way slab. BASIC STEPS OF TWO WAY SLAB DESIGN :
1. Choose layout and type of slab. Type of slab is strongly affected by architectural and construction considerations.
2. Choose slab thickness to control deflection. Also, check if thickness is adequate for shear.
3. Choose design method.
1. Choose layout and type of slab. Type of slab is strongly affected by architectural and construction considerations.
2. Choose slab thickness to control deflection. Also, check if thickness is adequate for shear.
3. Choose design method.
Post a Comment